Rainwater Collection System-manufacture,factory,supplier from China

(Total 10 Products for Rainwater Collection System)

Fiberglass Geogrids

Product DetailsFiberglass geogrid is made of excellent reinforcement type non-alkali glass fiber yarn which is weaved into base material by using foreign advanced warp knitting directional structure. Fiberglass geogrid can make full use of yarn textile strength to improve its chemical performance, high tension resistance, tearing resistance and creep resistance. Fiberglass geogrid system is widely used to reinforce road surface, prevent highway harm such as crack and rut from occurring, solve the problem that asphalt road surface is difficult to reinforce.ParameterItem

Contacter maintenant

Fiberglass Fabric Cloth Mesh

Fiberglass Fabric Cloth MeshFiberglass Fabric Cloth Mesh is fiberglass leno fabric to be the substrate, the anti-emulsion polymer coating after immersion, which has good alkali resistance, flexibility and strong tensile strength, it can be widely used in exterior insulation finishing system (EIFS), roofing system, marble,etc.1.Factory supply2.Quick delivery3.Perfect serviceFiberglass

Contacter maintenant

Hot Sale Reinforced Fiberglass Alkali Resistant Mesh Netting Fabric For Concrete

Hot Sale Reinforced Fiberglass Alkali Resistant Mesh Netting Fabric For ConcreteFiberglass mesh is fiberglass leno cloth because the substrate, the anti-emulsion polymer coating after immersion, which has appropriate Alkali resistance, flexibility and robust tensile energy, it is able to be extensively utilized in exterior insulation finishing system (eifs), roofing System, marble,etc.1.Factory supply2.Quick delivery3.Perfect serviceFiberglass mesh is mainly alkali-resistant fiberglass fabri

Contacter maintenant

PP Twist Bundle Fiber

Product Details Twisted package pp fiber is developed for replacement of metallic fiber. With polypropylene as its raw material,it's far produced by way of special drawing twisting and surface remedy. Compared with metallic fiber, it has benefits of acid, alkali resistant, first rate tensile, clean dispersing, comfort for creation and no harm to the combination system. ParameterDensity(g/cm³)0.91Tensile Strength(Mpa)≥ 450MpaLength(mm)38,50,54mmElastic Modulus(Mpa)＞4000ColorWhite/Black/GreyEquivalent Dia(mm)0.3±0.05Material100% polypropyleneCrack Elongation(%)≥15ShapeTwi

Contacter maintenant

Sticky Fiberglass Mesh for GRC Factory

Fiberglass Mesh FabricFiberglass Mesh is fiberglass leno fabric as the substrate, the anti-emulsion polymer coating after immersion, which has goodalkali resistance, flexibility and strong tensile strength, it can be widely used in exterior insulation finishing system (EIFS), roofing system, marble,etc.1.Factory supply2.Quick delivery3.Perfect serviceFiberglass mesh is mainly alkali-resistant

Contacter maintenant

High Strength 100% Polypropylene PP Fiber for Concrete

High Strength 100% Polypropylene PP Fiber for ConcreteQuality Compliance CE EN14889-2With 100% polypropylene as raw material, PP macro fiber is produced by special molding process and surface modification; it has advantage of acid, alkali resistant, excellent tensile, easy dispersing, convenience for construction and no damage to vehicles and pavement and no need for special conservation. PP macro fiber can be used instead of steel fiber to enhance the crack resistance of cement concrete and significantly improve the toughness and flexural of concrete.

Contacter maintenant

Macro-Polypropylene Fiber For Concrete

Macro-Polypropylene Fiber For ConcreteIn order to overcome the weakness of concrete itself,People introduced macro-polypropylene fiber-reinforced concrete technology.Macro-polypropylene fiber is made of polypropylene through special modification and surface molding process.It has advantage of acid,alkail resistant,So macro-polypropylene fiber be suitable for various environment.Macro-polypropylene fiber not only has Excellent tensile,which can improve the toughness and flexural of concrete,but also has strong crack resistance .It easy dispersing,convenience for construction and no damage to ve

Contacter maintenant

Biaxial Geogrid for Road Construction

Product DetailsFiberglass geogrid is manufactured from tremendous reinforcement type non-alkali glass fiber yarn that is weaved into base material by way of using overseas advanced warp knitting directional shape.

Contacter maintenant

Black 3D Geomat

Product Details3-D geomat is like a gourd community three-dimensional shape for the planting soil, loose and flexible, with a ninety% space filling soil, gravel and excellent stone, plant roots can interfere, relaxed, orderly and balanced growth after developing grass mat, turf, soil.The surface tightly collectively, due to the fact the plant roots deep beneath the floor of 30 - 40 cm, forming a defensive layer of inexperienced composite stable.Earlier than the turf grows, it protects the floor of the soil from rain and wind.It could firmly keep the seeds lightly dispensed at the slope, from t

Contacter maintenant

Macrosynthetic Fiber

Product Details When the fiber is put into the concrete, the horizontal structure in fiber monofilament may be destroyed inside the course of stirring attributable to friction and rubbing, and the fiber monofilament or net-like shape will completely stretch, consequently the concrete is reinforced by using a remarkable quantity of polypropylene fibers.ParameterDensity(g/cm³)0.91Tensile Strength(Mpa)≥ 450MpaLength(mm)6,12,18,24,36mm......Elastic Modulus(Mpa)＞3500ShapeBeam-like NetEquivalent Dia(μm)100±50Material100% polypropyleneCrack Elongation(%)≥16Water-AbsorbencyNoMelting Poi

Contacter maintenant

Relate News

The Advantages Of Plastic Grass Grid Over Grass Planting Brick

The Advantages Of Plastic Grass Grid Over Grass Planting Brick The wheel pressure of the car is 100 tons /㎡, parking on the general grass will make the floor sink, at the same time, the car will roll the grass roots, in order to solve this problem, generally adopt the following two ways, one is to lay grass bricks, the other is to lay plastic grass.

Key Points of Construction of Geogrid

Construction site: it is required to be compacted, leveled, horizontal, and the sharp protrusions shall be removed.Grating laying: on a flat and compacted site, the main stress direction (longitudinal) of the installed and laid grating shall be perpendicular to the axis direction of the embankment, and the laying shall be flat, wrinkle free, and tensioned as far as possible. Fix the grid with dowels and earth rock weights. The main stress direction of the paved grid should be full length without joints.

The News Of Company

On Jan 5th,the year of 2022, because our company is Alibaba's leading business enterprise, and we are a verified supplier on Alibaba.com , which requires official certification every year.Professional staff have taken professional photos of our factories and products, and specially made 3D modeling of the factories.Our future will get better and better, and our strength will become stronger and stronger.Welcome to visit our company, Glad to cooperate with you.

Performance Characteristics of Geomembrane

1. hdpe geomembrane is a sort of flexible water resistant cloth with high anti-seepage coefficient (1 × 10-17 cm/s）；2. hdpe geomembrane has proper heat resistance and bloodless resistance, and its service ambient temperature is 110 ℃ at high temperature and - 70 ℃ at low temperature;3. hdpe geomembrane has top chemical balance and may withstand the corrosion of robust acid, alkali and oil. it is a superb anti-corrosion material;4. HDPE geomembrane has high tensile strength, which makes it have high tensile strength and can meet the needs of high standard engineering projects;5.

Polypropylene Macro Fiber for Concrete Reinforcement

Polypropylene Macro Fiber,is produced by 100% new polypropylene,by special molding process and surface modification. It is very popular for more than 20 countries and nations,such as America,Australia,Europe,Africa,South America,the Middle East and South East Asia.At the same time,our compamy has passed ISO SGS and TUV certificate,Especially we have CE Certificate for all kinds of our concrete fibers.

Details of Plastic Biaxial Geogrid

Plastic geogrid includes biaxial geogrid and uniaxial geogrid in line with its shape.Biaxial geogrid is product of polyethylene or excessive density polyethylene as the principle uncooked material through the approaches of heat-soften extrusion, vertical and horizontal stretching to form a excessive power reinforced rectangular mesh shape.Uniaxial geogrid is product of excessive molecular polymer after extruded and laminated and punched into normal mesh earlier than longitudinal stretching.this device makes excessive molecule in direct line u . s .

Use of Polyethylene Unidirectional Plastic Geogrid

Uniaxial tensile geogrid is a kind of high strength geosynthetics. It is widely used in dams, tunnels, wharfs, highways, railways, buildings and other fields.1. The geogrid enhances the subgrade, which can effectively distribute the diffusion load, improve the stability and bearing capacity of the subgrade, and extend the service life;2. The geogrid can bear greater alternating load;3. Geogrid shall prevent subgrade deformation and cracking caused by loss of subgrade materials;4.

Advantages of Biaxial Geogrid

High Tensile Strength Low ElongationExcellent soil stabilizationGood sub-base reinforcementAnti-corrosion Easy to install

What is the Function of Geotextile?

1. Isolation The construction materials with different physical properties (particle size, distribution, consistency and density, etc.) are needled with polyester staple fiber geotextile. Material (such as soil and sand, soil and concrete, etc.) for isolation. Make two or more materials not lose or mix, and keep them. Material of the overall structure and function, strengthen the bearing capacity of structures.2.

Ship 12000kgs Polypropylene Macrofiber for Concrete

Ship 12000kgs Polypropylene Macrofiber for Concrete Today we loaded 12000kgs Polypropylene Macrofiber for Concrete into 1x20GP.The Macrofiber is 48mm length and with embossed shape, high tensile strength for Concrete Reinforcement.The Packing is Watersoluble and Carton, easy to transport.With 100% polypropylene as raw material, PP macro fiber is produced by special molding process and surface modification; it has advantage of acid, alkali resistant, excellent tensile, easy dispersing, convenience for construction and no damage to vehicles and pavement and no need for special conservation.