Steel Composite Geogrid-manufacture,factory,supplier from China

What is the difference between one-way and two-way geogrid geogrid?Uniaxial geogrid and Biaxial geogrid belong to geogrid, on the side of the roads, ports, airports, mines and other very widely used in subgrade engineering construction, that between what's the difference? The following content is easy for everybody to introduce:1, product appearanceBidirectional geogrid is two-way rashin, porous structure, square mesh grille.Unidirectional geogrid is a bearing and drawing, a square mesh is thin.2, the processing technologyUnidirectional geogrid rashin are fit together on extrusion pro

Composite HDPE Dimple Drainage BoardRecently we are producing Composite HDPE Dimple Drainage Board for our client from the New York in USA, it is made by 100% new hdpe material, black color, composited with black geotextile fabric.

Plastic geogrid includes biaxial geogrid and uniaxial geogrid in line with its shape.Biaxial geogrid is product of polyethylene or excessive density polyethylene as the principle uncooked material through the approaches of heat-soften extrusion, vertical and horizontal stretching to form a excessive power reinforced rectangular mesh shape.Uniaxial geogrid is product of excessive molecular polymer after extruded and laminated and punched into normal mesh earlier than longitudinal stretching.this device makes excessive molecule in direct line u . s .

Plastic geogrid consists of biaxial geogrid and uniaxial geogrid in keeping with its structure.Biaxial geogrid is manufactured from polyethylene or immoderate density polyethylene as the principle raw fabric through the tactics of warm-soften extrusion, vertical and horizontal stretching to shape a excessive energy reinforced square mesh form.Uniaxial geogrid is made from high molecular polymer after extruded and laminated and punched into everyday mesh before longitudinal stretching.this machine makes immoderate molecule in direct line united states in square oval net shape with uniform distr

Uniaxial tensile geogrid is a kind of high strength geosynthetics. It is widely used in dams, tunnels, wharfs, highways, railways, buildings and other fields.1. The geogrid enhances the subgrade, which can effectively distribute the diffusion load, improve the stability and bearing capacity of the subgrade, and extend the service life;2. The geogrid can bear greater alternating load;3. Geogrid shall prevent subgrade deformation and cracking caused by loss of subgrade materials;4.

The use of geotechnical materials is the key product of engineering construction reinforcement. Shandong LUKE composite geomembrane is a common geomembrane product. Our company has a comprehensive understanding of the laying knowledge of composite geomembrane, especially the main impact in the aging factors and water quality of Shandong LUKE composite geomembrane.The water quality has little effect on the material, and when tested in water with a pH of 2-10, the material aging has little effect.

High Tensile Strength Low ElongationExcellent soil stabilizationGood sub-base reinforcementAnti-corrosion Easy to install

Construction site: it is required to be compacted, leveled, horizontal, and the sharp protrusions shall be removed.Grating laying: on a flat and compacted site, the main stress direction (longitudinal) of the installed and laid grating shall be perpendicular to the axis direction of the embankment, and the laying shall be flat, wrinkle free, and tensioned as far as possible. Fix the grid with dowels and earth rock weights. The main stress direction of the paved grid should be full length without joints.

Nov. 04th 2022Shandong Luke Composite Co., Ltd loaded the 1x40HQ container with 5600 cartons of HDPE Geocell, which will be shipped to NewYork port from Qingdao port on Nov. 11th 2022.

Geomembrane Feature1) LUKE High Temperature Geomembrane is an innovative new HDPE product engineered to withstand prolonged exposure to temperatures up to 100℃ (212℉). 2) Leak Location Liner is a high performance geomembrane with a co-extruded, electrically conductive bottom layer. The conductive layer makes it possible to detect leaks on wrinkles and other non-conductive surfaces, and it allows the   liner to be retested as often as necessary, even after cover materials have been placed.